• Brand: Bunn
  • Model: SET00.0207
$2,302.92
$1,381.75

Bunn FMD-2 BLK Fresh Mix Cappuccino / Espresso Machine Hot Beverage Dispenser with 2 Hoppers 120V

This Bunn FMD-2 BLK Fresh Mix cappuccino / espresso dispenser has a colorful, lighted mug display and two 4 lb. hoppers. The cappuccino / espresso machine's variable speed hopper motors give you complete control over the ratio of powdered mix to hot water inside the mixing chambers, so you can adjust for different types of products.

The Bunn FMD-2 BLK Fresh Mix hot beverage dispenser features a large hot water reservoir that provides a serving capacity of up to 4.2 gallons per hour. Its translucent, easy-to-fill hoppers ensure quick and timely refilling as needed. Adjustable legs and a drip tray can be configured to accommodate cups up to 7" tall.

The Bunn FMD-2 BLK cappuccino / espresso machine is ETL and NSF Listed and requires a 120V electrical connection. Consult the Specification Sheet for further installation requirements and dimensions.

Product Features:

  • Space saving narrow 8” (20.3 cm) cabinet width.
  • Variable speed hopper motors offer a wide range of product mix ratios (.75 to 6.6 grams of powder per second).
  • Large easy-to-fill translucent hoppers ensure quick and timely refilling.
  • Lighted graphics merchandise drinks for maximizing profits.
  • Large hot water reservoir provides 4.2 gal. (15.9 L)/hour serving capacity.
  • Adjustable legs and drip tray allows up to 7” (17.8 cm) opening for 20 oz. cups.
  • Specially designed mixing system guarantees perfect beverages every time.
  • Improved automatic rinse reduces run-on after beverage is dispensed.
  • Designed to be easily serviced from front and top of machine.

#table-specs tbody { margin: 0; padding: 0; border: 0; outline: 0; font-size: 100%; vertical-align: middle; background: transparent; } #table-specs thead { text-align: left; } #table-specs thead th { background: #dcdcdc; border: 0px; color: #000; font-size: 1.5em; font-weight: bold; padding: 4px 10px; } #table-specs td { padding: 2px 5px; } #table-specs tfoot td { background: #dcdcdc; border: 0px; color: #000; padding: 2px 5px; }

Dimensions and Specifications
*Based on incoming water temperature of 50°F.
**Power cord (NEMA 5-15P) 15 Amp-120V machine only.
Volts Amps Watts Total Watts Capacity Cubic Measure Dimensions Shipping Weight Cord Attached
120V 15A 1700W 1800W 5.2 gal.hr.* 8.3 ft³ 30"H x 7.9"W x 21"D 81 lbs. Yes**

Electrical:120V model requires 2-wires plus ground service rated 120V, single phase, 60 hz. 120/240V model requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60Hz.
Plumbing: 20-90 psi (138-621 kPa) from a 3/8" or larger supply line. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce it to 50 psi. Supplied with 1/4" male flare fitting.

Spec Sheet
Illustrated Parts
Operating Service
Service and Repair